During the operation of the automatic pipe bender, all its components can be maintained under harsh environmental standards (such as rainy days), improper operation, operating errors, loads, etc. All systems of pipe bending equipment are suitable to work under 40 and 0~99% ambient humidity. The pipe bender is suitable for the application at the average altitude of 0~2500. Before the pipe bender works, a suitable workplace must be selected. The site can consider the accumulation regulations of pipes and elbows, and can also ensure that the road surface can withstand the working pressure of the equipment. Bending performance, check whether the anti-corrosion layer has oil marks, dents, bends, folds, anti-corrosion serial numbers and pipe numbers, or appearance defects such as incorrect writing, scabbing, and equipment damage. Anti-corrosion parent pipe surface, and do a good job of engineering acceptance records.

Maintenance method of automatic pipe bending machine

1. The elbows that are stored for a long time should be regularly maintained, the exposed production and processing surface should be kept clean, and the dirt should be eliminated neatly and stored in an indoor area with natural ventilation and dryness. It is forbidden to accumulate or store it outdoors. Keep the elbow dry and naturally ventilated, keep the retainer clean and tidy, and store it according to the correct storage method.

2. During installation, the elbow can be directly installed on the pipeline according to the interface method, and can also be installed according to the application site. Under normal circumstances, it can be installed in all parts of the pipeline, but requires convenient operation and inspection. Note that the material flow up to the elbow should be from the vertical piston valve position, and the elbow can only be installed horizontally. When installing, pay attention to the tightness of the elbow to prevent leakage and endanger the normal operation of the pipeline.

In addition, the key hazards of the bending rate of the automatic pipe bender to the forming quality are:

If the speed is too fast, it is easy to flatten the bending part of the hose, and the concentricity cannot meet the requirements, resulting in the rupture of the hose; if the speed is too slow, it is easy to cause the wrinkling of the pipeline and the deviation of the steel cutting, and the large-diameter tube will easily produce the tube. Dent in the curved part of the road. According to many experiments on these two automatic pipe bending machines, it is determined that 20%-40% of the bending speed of the equipment is appropriate.