The use of pipe cutting machines is very wide, and there are many types of pipe cutting machines. Below I will introduce the advantages of knife rotary pipe cutting machines.

1. The pipe does not rotate during high-speed cutting, the head knife rotates at high speed, and the large-diameter and small-diameter pipes can be cut at high speed. The cutting speed is very fast, when the 159mm tube wall thickness is 3mm, the cutting time is about 15 seconds.

2. High precision, the equipment adopts servo motor and ball screw to cooperate to feed, and the controllable precision error is 0.15 mm within 500 mm.

3. Power saving, no motor is required to drive the pipe to rotate, and the installed power is generally between 5.5-11kw.

4. Cutting technology saves tools in the process of processing, and the cost of cutting tubes with turning tools is low. Cutting tubes with turning tools continues the advantages of tube cutting by lathes. The tools can be repeatedly researched and used effectively after grinding.

5. The cutting section is smooth and has few burrs. According to the adjustment of the cutting edge shape, the welding groove can be realized with a flush cross section.

6. The round nylon fixing device is used, which has high requirements on the surface of the accessories, which can avoid surface scratches, and the thin-walled tube will not be deformed when clamped.

7. Adopt V-shaped cast iron fixture, the fixture design is durable, the fixture is used for clamping, and there is no need to replace a fixture.

8 Safety, equipment head with protective system safety cover, because these tubes are not turned to avoid violent shaking when the pipe is cut.

9 The workshop has a good working environment, the iron filings are easy to clean, and the pipe cutting noise is low.

The above are the advantages of the knife rotary pipe cutting machine. If you want to consult more about the advantages of the pipe cutting machine, you can consult Zhangjiagang Weibo Machinery Co., Ltd.